1. Dismantle and sanitize complete machine including motor components
2. Replace carbon brushes if needed
3. Clean and rewind spring assembly on cord rewind unit.
4. Do any repairs needed to cord or wiring harness, including cleaning sensor contacts and bag full indicators.
5. Replace any filters on the inside of machine
6. Replace the dust bag.
7. Replace any outside filters.
8. Polish the machine for delivery.

1. Dismantle and sanitize complete head.
2. Dismantle and clean the roller bar.
3. Check and service cord and internal wiring
4. Replace light bulb if needed.
5. Replace flat belt or check geared belt for wear.
6. Test switches and resets to ensure proper operation and protection for power head.
7. Polish outside for delivery.

Upright
 

1. Dismantle and sanitize complete machine, including motor components.
2. Replace carbon brushes if needed.
3. Clean and check cloth outer bag for tears and leaks.
4. Clean and check roller bar, including internal bearings, replace brush strips if needed.
5. Replace inner motor filters and outer exhaust filters.
6. Replace paper bag.
7. Replace belt on roller.
8. Check and repair the cord and wiring harness on machine if needed
9. Polish outside of machine for delivery.